HP Integrity rx8620 Server User Service Guide

Table 3-3 HP Integrity rx8620 Server - Linux Supported I/O Cards (continued)
Number of Cards SupportedCard DescriptionPart Number
2PCI 1-port 10GbE SR (133Mhz)AD144A
4PCI 4-port 1000Base-TAD145A
Table 3-4 HP Integrity rx8620 Server - Open VMS Supported I/O Cards
Number of Cards Supported
(B-Bootable)
Card DescriptionPart Number
8BPCI X 2 channel 2 Gb /s Fibre ChannelA6826A
2BPCI 2 channel Ultra320 SCSI AdapterA7173A
8BPCI 1 port 4 Gb Fibre ChannelAB378A
8BPCI 2 port 4 Gb Fibre ChannelAB379A
3PCI X 4 port 1000Base T Gigabit AdapterAB545A
8PCI 1 port 1000Base SXA6847A
8PCI 1 port 1000Base TA6825A
8PCI X 2 port 1000Base SXA7011A
8PCI X 2 port 1000Base TA7012A
4BPCI X 2 Gb Fibre Channel, 1000Base SXA9782A
4BPCI X 2 Gb Fibre Channel, 1000Base TA9784A
2BPCI X 2 port 2 Gb FC/2 port 1 Gb EthernetAB465A
2BPCI X 2 port 1000Base T/2 port Ultra320 SCSIAB290A
PCI I/O Card Installation
IMPORTANT: The installation process varies depending on what method for installing the PCI
card you select. PCI I/O card installation procedures should be downloaded from the HP website
at http://hp.com. Background information and procedures for adding a new PCI I/O card
using online addition are found in the Interface Card OL* Support Guide.
PCI I/O OL* Card Methods
There are three methods for performing OL* operations on PCI I/O cards.
pdweb
The Peripheral Device Tool (pdweb) Web-based method of performing
OL*.
olrad
The command line method of performing OL*.
Attention Button The hardware system slot based method of performing OL*.
Prerequisites for Adding a PCI I/O Card Using the Attention Button The prerequisites for this
procedure are as follows:
Drivers for the card have already been installed.
There are no drivers associated with the slot.
The green power LED is steady Off. Should the empty slot be on, use the olrad command
or the pdweb tool to power the slot off
The yellow attention LED is steady Off or is blinking if a user has requested the slot location.
For details on card installation, see the host bus adapter (HBA) documentation.
Installing Add-On Products 53