HP Integrity rx8620 Server User Service Guide

Figure 4-13 The lc Command Screen
NOTE: The value in the “IP address” field has been set at the factory. Obtain the LAN IP
address from the customer.
3. At the prompt, Do you want to modify the configuration for the customer
LAN?, enter y.
The current IP address is shown; then the following prompt is displayed: Do you want
to modify it? (Y/[N])
4. Enter y.
5. Enter the new IP address.
The customer provides this address for network interface 0.
6. Confirm the new address.
7. Enter the MP Hostname.
This is the hostname for the customer LAN. The name can be as many as 64 characters, and
include alpha numerics, - (dash), _ (under bar), . (period), or a space. It is recommended that
the name be a derivative of the complex name. For example, Acme.com_MP.
8. Enter the LAN parameters for Subnet mask and Gateway address.
This information comes from the customer.
9. When step 7 completes, the server indicates the parameters updated, and returns to the MP
Command Menu prompt (MP:CM>)
10. To check the LAN parameters and status, enter ls at the MP Command Menu prompt
(MP:CM>).
11. A screen similar to the following displays enabling verification of the settings:
Configuring LAN Information for the MP 69