HP Integrity rx8620 Server User Service Guide

Figure 5-2 BPS LED Location
Table 5-2 BPS LEDs
DescriptionLED Indication
BPS in standby state and no faults or warningsBlink Green
BPS in run state (48 V output enabled) and no faults or warningsGreen
BPS in standby or run state and warnings present but no faultsBlink Yellow
BPS in standby state and recoverable faults present but no non-recoverable faultsYellow
BPS state may be unknown, non-recoverable faults presentBlink Red
This LED state is not usedRed
BPS fault or failure, no power cords installed or no power to chassisOff
PCI Power Supply LEDs
There are three LEDs on the PCI power supply. The green power LED reports overall power
status for the PCI power supply. The yellow attention LED is not currently used for status. The
multi-colored fault LED reports faults and warnings.
HP Integrity rx8620 Server LED Indicators 83