HP Integrity rx8620 Server User Service Guide

Figure 5-7 Core I/O Card Bulkhead LEDs
Table 5-7 Core I/O LEDs
DescriptionStateDriven byLED (as silk-screened
on the bulkhead)
Indicates standby power is onOn Green3.3 V standby power railMP PWR
This core I/O is managing the systemOn GreenMPACTIVE
Both switches are in position F1
(silk-screened on the core I/O board) for
systems other than the rp8400
On GreenMP SEL
Both switches are in position F0
(silk-screened on the core I/O board) for
rp8400 systems
Off
88 Troubleshooting