HP Integrity rx8620 Server User Service Guide

Table 5-11 Status Commands (continued)
Display the list of available commandsHE
Display LAN connected console statusLS
Display modem statusMS
Display detailed power and hardware configuration statusPS
Table 5-12 lists the server system and access configuration commands
Table 5-12 System and Access Configuration Commands
DescriptionCommand
Configure Asynchronous and Modem parametersCA
Initiate a Complex ConfigurationCC
Generate ssl key pair and self signed certificateCG
Display partition cell assignmentsCP
Set the time and dateDATE
Reset parameters to default configurationDC
Display entity statusDE
Disconnect remote or LAN consoleDI
Duplicate firmwareDFW
Display devices on busDU
Firmware update utilityFW
Change certain stable complex configuration profile fieldsID
Display network interface informationIF
Modify command interface inactivity time-outIT
Configure LAN connectionsLC
Display LAN connected console statusLS
Modify default Partition for this login sessionPD
Allows user to configure the power gridPWRGRD
Enable/Disable interpartition securityPARPERM
Re-key complex profile lockRL
Reset MP bus deviceRU
Display and set MP remote accessSA
Configure security options and access controlSO
MP Diagnostic and rebootXD
Firmware Updating
The server MP pulls a firmware update from an FTP server over the management LAN. When
replacing a cell board in a currently operating system, see “Cell Break-Fix Upgrade and
Downgrade Procedure” on page 146.
Firmware Updating 95