Installation Guide, Sixth Edition - HP Integrity rx8620 Server

Chapter 2

Installation

Wheel Kit Installation

Compare the packing list with the contents of the wheel kit before beginning the installation.

Tools Required for Installation

The following list provides the installer with the recommended tools to perform the wheel kit installation.

• Diagonal side cutters

• Safety glasses

• Torx driver with T-15 bit

• Phillips head screwdriver

WARNING Wear protective glasses while cutting the plastic bands around the shipping

container. These bands are under tension. When cut, they can spring back and cause

serious eye injury.

Table 2-1 Wheel Kit Packing List

Part Number Description Quantity

A9904-04002 Caster Cover 2

A9904-04007 Right Side Cover 1

A9904-04008 Left Side Cover 1

A9904-04009 Top Cover 1

A6093-04082 Right Front Caster Assembly 1

A6093-04083 Right Rear Caster Assembly 1

A6093-04084 Left Front Caster Assembly 1

A6093-04085 Left Rear Caster Assembly 1

0515-2478 M4 x 0.7 8mm T15 Steel Zinc

Machine Screw (Used to attach

each caster to the chassis)

A6093-44013 Plywood Unloading Ramp 1

Not Applicable Phillips Head Wood Screw (used to

attach the ramp to the pallet)