Installation Guide, Sixth Edition - HP Integrity rx8620 Server

Chapter 2

Installation

Wheel Kit Installation

Removing the Side Cover

Figure 2-16 Side Cover Detail

Step 1. Connect to ground with a wrist strap.

Step 2. Loosen the blue retaining screw securing the cover to the chassis. See Figure 2-16.

Step 3. Slide the cover from the chassis toward the rear of the system.

Step 4. Place the cover in a safe location.

Installing the Side Cover

Step 1. Orient the cover according to its position on the chassis.

Step 2. Slide the cover into position using a slow, firm pressure to properly seat the cover.

Step 3. Tighten the blue retaining screw securing the cover to the chassis.

Retaining Screw