Installation Guide, Sixth Edition - HP Integrity rx8620 Server

Chapter 2

Installation

Installing Accessories

NOTE A slow, firm pressure is needed to properly seat the card into the backplane.

Step 5. Flip the PCI gate for the card slot to the closed position.

CAUTION Working out of sequence or not completing the actions within each step could cause

the system to crash.

Do not press the attention button until the latch is locked.

Step 6. Press the attention button.

The green power LED will start to blink.

Figure 2-18 PCI I/O Slot Details

Step 7. Wait for the green power LED to stop blinking and turn on solid.

Step 8. Check for errors in the hotplugd daemon log file (default: /var/adm/hotplugd.log).

The critical resource analysis (CRA) performed while doing an attention button initiated add action

is very restrictive and the action will not complete–it will fail–to protect critical resources from

being impacted. For finer control over CRA actions use pdweb or the olrad command. Refer to the

Interface Card OL* Support Guide located on the Web at http://docs.hp.com for details.

Step 9. Replace the top cover.

Step 10. Connect all cables to the installed PCI card.

Gate Closed

Gate Open

Power LED (Green)

Attention LED (Yellow)

Attention Button