Installation Guide, Sixth Edition - HP Integrity rx8620 Server

Chapter 2
Installation
Cabling and Power Up
81
Enter lc and press the
Return key. The following screen is displayed:
Figure 2-33 The lc Command Screen
NOTE The value in the “IP address” field has been set at the factory. Obtain the LAN IP address
from the customer.
2. At the prompt,
Do you want to modify the configuration for the customer LAN? , enter y.
The current IP address is shown; then the following prompt is displayed:
Do you want to modify it?
(Y/[N]
)
3. Enter y.
4. Enter the new IP address.
The customer shall provide this address for network interface 0.
5. Confirm the new address.
6. Enter the MP Hostname.
This is the hostname for the customer LAN. The name can be as many as 64 characters, and include alpha
numerics, - (dash), _ (under bar), . (period), or a space. It is recommended that the name be a derivative of
the complex name. For example, Acme.com_MP.
7. Enter the LAN parameters for Subnet mask and Gateway address.
This information shall come from the customer.
8. When step 7 is completed, the system will indicate the parameters have been updated and return to the
MP Command Menu prompt (MP:CM>)