Installation Guide, Sixth Edition - HP Integrity rx8620 Server

Chapter 2

Installation

Cabling and Power Up

Step 5. Launch a Web browser on the same subnet using the IP address for the MP LAN port.

Figure 2-36 Browser Window

Step 6. Click anywhere on the Zoom In/Out title bar to generate a full screen MP window.

Step 7. Select the emulation type you want to use.

Step 8. Login to the MP when the login window appears.

Access to the MP via a Web browser is now possible.

Verifying Presence of the Cell Boards

To perform this activity, either connect to the Management Processor (MP) over the customer console or

connect the CE Tool (laptop) to the RS-232 Local port on the MP.

After logging in to the MP, verify that the MP detects the presence of all the cells installed in the server

cabinet. It is important for the MP to detect the cell boards. If it does not, the partitions will not boot.

To determine if the MP detects the cell boards:

1. At the MP prompt, enter cm.

This displays the Command Menu. Among other things, the Command Menu allows one to view or modify

the configuration and look at utilities controlled by the MP.

Zoom In/Out

Title Bar