Site Preparation Guide, Fourth Edition - HP Integrity rx8620 Server

Chapter 1

System Specifications

Dimensions and Weights

This section provides dimensions and weights of the server and server components.

Table 1-2 provides component weights for calculating the weight of a server not fully configured. Table 1-7 on

page 12 provides an example of how to calculate the weight. Table 1-8 on page 12 is a blank worksheet for

calculating the weight of the server.

Table 1-1 HP Integrity rx8620 Server Dimensions and Weights

Stand-alone Packaged

Height - Inches (centimeters) 29.55 (75.00) 86.50 (219.70)

Width - Inches (centimeters) 17.50 (44.50) 40.00 (101.60)

Depth - Inches (centimeters) 30.00 (76.20) 48.00 (122.00)

Weight - Pounds (kilograms)

368.00

(166.92)

a. This weight represents a fully configured server before it is installed in a

rack.

813.00

(368.77)

b. The packaged weight represents a server installed in a 2-m rack. The

packaged weight includes a fully configured server in a 2-m rack with a rear

door, rail slide kit, line cord anchor kit, interlock assembly, cable

management arm, 120 lb. ballast kit, and a 60A PDU. The shipping box,

pallet, and container, not included in the packaged weight in Table 1-1, adds

approximately 150.0 lb. to the total system weight when shipped. The size

and number of miscellaneous pallets will be determined by the equipment

ordered by the customer.

Table 1-2 HP Integrity rx8620 Server Component Weights

Quantity Description Weight (lb./kg.)

1 Chassis 131.00 (59.42)

1 System backplane 20.0 (9.07)

1 PCI-X card cage assembly 20.40 (9.25)

2 PCI-X power supply 5.00 (2.27) each

6 Bulk power supply 12.00 (5.44) each

1 Mass storage backplane 1.00 (0.45)

1 - 4 Cell board 27.80 (12.61) each

1 - 4 Hard disk drive 1.60 (0.73) each

1 - 2 Removable media disk drive 2.20 (1.00) each