SmartSetup Scripting Toolkit Deployment Guide for HP Integrity Servers with Windows Server 2003 and Windows Server 2008 for Itanium-based Systems
SSTK log file
When the SSTK scripts run, SSTK records event messages and errors in a log file. Each time you
boot the target server, a new log file is created with the proper time stamp. SSTK creates a file
with the following name:
SystemName-SerialNumber-yyyymmdd-hhmmss.log
Where:
SystemName
The system name.
SerialNumber
The system serial number.
yyyymmdd The current date (yyyy = year, mm = month, and dd = day).
hhmmss The current time (hh = hour, mm = minute, and ss = second).
For example: server rx7640-USE46440SD-20080114153020.log.
Log file format
For each command executed by an SSTK script, the following entry is recorded in the log file:
[Thu 12/20/2007] [13:18:00.72] Initializing SSTK ...
[Thu 12/20/2007] [13:18:00.72] "Executing net use ..."
Return number: 0
Standard output:
Standard error:
[Thu 12/20/2007] [13:18:00.74] Setting SSTK environment variables
[Thu 12/20/2007] [13:18:00.76] PATH updated to
[y:\utilities\libs;X:\windows\system32;X:\windows;X:\windows\System32\Wbem]
[Thu 12/20/2007] [13:18:00.76] Initializing SSTK log system
[Thu 12/20/2007] [13:18:00.79] y:\utilities\hwdiscovery.exe -f x:\hwdisc.dat
"Executing hwdiscovery ..."
Return number: -1073740940
Standard output:
Standard error:
[Thu 12/20/2007] [13:18:05.10] Copying temporary log file to y:\data_files\logs\server
rx3600-USE0609KLB-gjkiyr-20071220-31805.log
[Thu 12/20/2007] [13:18:05.13] "Deploying Windows Server 2003 ..."
[Thu 12/20/2007] [13:18:05.15] y:\utilities\hpchkclm.exe -y –n
"Executing hpchkclm ..."
Return number: 0
Standard output:
HP server: rx3600
Threads supported per node: 16
Number of threads detected: 8
Processor architecture: ia64/itanium 2-core
Perf. counter frequency: 399MHz
Numa total memory available: 3GBytes
Node: Memory: Processors:
0 3GB 0, 1, 2, 3, 4, 5, 6, 7,
This system is not capable of NUMA.
Standard error:
[Thu 12/20/2007] [13:18:05.23] diskpart /s y:\scripts\diskpart\default_layout_2003.txt
"Executing diskpart ..."
Return number: 0
Standard output:
Microsoft DiskPart version 6.0.6001
Copyright (C) 1999-2007 Microsoft Corporation.
On computer: MININT-IPVEEKQ
.
.
.
When an SSTK action finishes with success the log system shows the following message:
Action action name Done.
Monitoring the Deployment
You can monitor the deployment remotely by connecting to the target server Integrated Lights-Out
(ILO) interface or to the HP Management Processor (MP), which enables you to see the server
console output. In order to access the server console, type the MP IP address in your favorite
browser (for iLO interface) or in a telnet session or SSH client (for MP interface).
If you must force the target server to reboot, you can type restart at the WinPE SAC or use
the MP command line interface. To use the MP command line interface, follow these steps:
34 Booting the server