SmartSetup Scripting Toolkit Deployment Guide for HP Integrity Servers with Windows Server 2003 and Windows Server 2008 for Itanium-based Systems

Table 6-3 hplpcfg error codes (continued)
DescriptionValue
Invalid LUN8
Invalid value. For enable or disable, the value is not 0 or 1 (/le option only).
0x10
The loaded boot BIOS code is incorrect (/le option only).
0x11
General error, initialization error (/le and /se), or cannot read the HBA WWPN (/se option).
0xFF
NOTE: If there are multiple HBAs in the configuration file or on the host, the utility returns
success if there is at least one successful save (/se) or load (/le) operation. If the command line
option fails on all HBAs found, the last encountered error type is returned unless it is a file I/O
error. For file I/O error, the utility exits immediately.
hplpcfg 57