AB312-3405A Air Baffle Installation Guide (for HP AM225A, AM232A, and AM233A cards in HP Integrity rx7640 and rx8640 servers) - January 2012

The baffle should rest lightly above the card. The top of the air baffle should be flush with the top
of the blue lockers.
Figure 3
Removing the air baffle
IMPORTANT: The air baffle must be installed to ensure proper air flow over the card. Only remove
it in order to service or replace the card.
To remove the baffle, gently pull it up from the slot’s blue locker; then remove it from the slot.
Be sure to re-install the air baffle after servicing is completed.
4