HP Integrity rx8640 and HP 9000 rp8440 Servers Installation Guide

5. Remove the front cushion only (Figure 19). Do not remove any other cushions until further
instructed.
Figure 19 Removing Cushion from Front Edge of Server
Rear Cushion
Side Cushion
Front Cushion
6. Open the wheel kit box and locate the two front casters. The front casters are shorter in length
than the two rear casters. Each front caster is designed to fit only one corner of the server
(right front caster and left front caster).
7. Remove two of the eight screws from the plastic pouch. Attach one wheel caster to the front
of the server (Figure 20).
Installing the Wheel Kit 33