HP Integrity rx8640 and HP 9000 rp8440 Servers Installation Guide

Figure 20 Attaching a Caster Wheel to the Server
Front Casters
8. Attach the remaining front caster to the server using two more screws supplied in the plastic
pouch.
9. Remove the rear cushion at the rear of the server. Do not remove the remaining cushions.
10. Mount the two rear casters to the server using the remaining four screws.
11. Obtain the plywood ramp from the wheel kit.
12. The ramp has two predrilled holes (Figure 21). Attach the ramp to the edge of the pallet using
the two screws taped to the ramp.
Figure 21 Attaching the Ramp to the Pallet
Pre-drilled holes
34 Installing the System