HP Integrity rx8640 and HP 9000 rp8440 Servers Installation Guide

13. Remove the two side cushions from the server, (Figure 22) and unfold the cardboard tray so
that it lays flat on the pallet.
Figure 22 Removing Side Cushion from Server
Ramp
Side Cushion
14. Carefully roll the server off the pallet and down the ramp.
15. Obtain the caster covers from the wheel kit. Note that the caster covers are designed to fit on
either side of the server.
16. Insert the slot on the caster cover into the front caster (Figure 23). Secure the caster cover to
the server by tightening the captive screw on the cover at the rear of the server. Repeat for
the second caster cover.
Installing the Wheel Kit 35