Manualshelf

HP Integrity rx8640 and HP 9000 rp8440 Servers Installation Guide

ManualsBrandsHP ManualsServerHP Integrity rx8640 Server
31323334353637383940
Figure 26 Top Cover Detail
Retaining Screws
Installing the Top Cover
The following section describes the procedure for installing the top cover.
1. Orient the cover according to its position on the chassis.
2. Slide the cover into position using a slow, firm pressure to properly seat the cover.
3. Tighten the blue retaining screws securing the cover to the chassis.
Removing the Side Cover
The following section describes the procedure for removing the side cover.
1. Connect to ground with a wrist strap.
2. Loosen the blue retaining screw securing the cover to the chassis (Figure 27).
38 Installing the System