HP Integrity rx8640, HP 9000 rp8440 Server User Service Guide

Table 26 BPS LEDs (continued)
DescriptionLED Indication
BPS in standby or run state and warnings present but no faultsBlink Yellow
BPS in standby state and recoverable faults present but no non-recoverable faultsYellow
BPS state may be unknown, non-recoverable faults presentBlink Red
This LED state is not usedRed
BPS fault or failure, no power cords installed or no power to chassisOff
PCI-X Power Supply LEDs
There are two active LEDs on the PCI-X power supply. A green power LED and a multi-color LED
reports warnings and faults.
Figure 52 PCI-X Power Supply LED Locations
1 2
Table 27 PCI-X Power Supply LEDs
DescriptionStateDriven ByLED
All output voltages generated by the power supply are
within limits.
On GreenEach supplyPower
1
Power to entire system has been removed.Off
The temperature within the power supply is above the lower
threshold.
Flash YellowEach supplyFault
2
The temperature of the power supply is approaching the
thermal limit.
On Yellow
Power supply has shut down due to an over temperature
condition, a failure to regulate the power within expected
limits, or a current-limit condition.
Flash Red
Normal operation.Off
System and I/O Fan LEDs
There is a single, three-color LED located on the front OLR fan, the rear OLR fan and the PCI I/O
fan.
Server LED Indicators 115