HP Integrity rx8640, HP 9000 rp8440 Server User Service Guide

Figure 62 swremove Output
Installing on Linux
The firmware update is installed using the rpm.
Enter the rpm command.
# rpm -i FWPHSS_28608.rpm
Figure 63 rpm output
Installing on Windows
An executable file must be downloaded, then executed in Windows. Upon running the utility, a
setup wizard guides the user through the installation steps. The following are the various steps of
the setup wizard.
1. Run the executable file.
2. Accept the terms of the agreement and click the Next button.
128 Server Troubleshooting