HP Integrity rx8640, HP 9000 rp8440 Server User Service Guide

Figure 70 Top Cover Removed
Retaining Screws
Replacing the Top Cover
1. Orient the cover on the top of the chassis.
NOTE: Carefully seat the cover to avoid damage to the intrusion switch.
2. Slide the cover into position using a slow, firm pressure to properly seat the cover.
3. Tighten the blue retaining screws securing the cover to the chassis.
Removing the Side Cover
1. Connect to ground with a wrist strap. See “Electrostatic Discharge ” (page 134) for more
information.
2. Loosen the blue retaining screw securing the cover to the chassis. See Figure 71.
Removing and Replacing Covers 137