HP Integrity rx8640, HP 9000 rp8440 Server User Service Guide

Figure 71 Side Cover Removal Detail
Retaining Screw
3. Slide the cover from the chassis toward the rear of the system.
4. Place the cover in a safe location.
Replacing the Side Cover
1. Orient the cover on the side of the chassis.
2. Slide the cover into position using a slow, firm pressure to properly seat the cover.
3. Tighten the blue retaining screw securing the cover to the chassis.
Removing and Replacing the Front Bezel
To remove the front bezel:
From the front of the server, grasp both sides of the bezel and pull firmly toward you (Figure 72).
The catches will release and the bezel will pull free.
138 Removing and Replacing Components