HP Integrity rx8640, HP 9000 rp8440 Server User Service Guide

Figure 72 Bezel Removal and Replacement
Grasp Here
Replacing the Front Bezel
1. If you are replacint the bezel, visually inspect the replacement part for the proper part number.
2. From the front of the server, grasp both sides of the bezel and push toward the server. The
catches will secure the bezel to the chassis.
Removing and Replacing the Front Panel Board
The front panel board is located behind the front panel bezel. Both are located on the front of the
chassis (Figure 73). The system power must.
WARNING! The system power must be turned off to replace this CRU. See “Powering Off
Hardware Components and Powering On the Server” (page 134).
Removing and Replacing the Front Panel Board 139