HP Integrity rx8640, HP 9000 rp8440 Server User Service Guide

Figure 73 Front Panel Assembly Location
Front Panel Bezel
Removing the Front Panel Board
1. Power off the system.
2. Remove the front bezel.
3. Remove the top cover.
4. Remove the left side cover.
5. Remove the two top disk drives.
6. Remove and retain the two screws securing the front panel bezel to the front panel.
7. Depress the front bezel center tab and pull straight out, away from chassis toward the front
of the system (Figure 74).
Figure 74 Front Panel Bezel Removed
Screws
secure the
front panel
board
8. Remove and retain the three screws securing the front panel board.
9. Remove the board by sliding it out the rear of the front panel assembly. See Figure 75
(page 141).
140 Removing and Replacing Components