HP Integrity rx8640, HP 9000 rp8440 Server User Service Guide

3. Route the cable the same way it was before removal and connect the cable to the system
backplane (Figure 77).
4. Reinstall the front panel bezel. Align the light pipes and screw back into place.
5. Replace the two top disk drives.
6. Replace top cover.
7. Replace the left side cover.
8. Replace the front bezel.
9. Power on the system.
Figure 77 Front Panel Board Cable Location on Backplane
Front Panel Board Connection
System Backplane
Removing and Replacing the Front Smart Fan Assembly
The front smart fan assembly is located in the front of the chassis (Figure 78). The fan assembly is
a hot-swap component. See “Hot-Swap CRUs” (page 133) for a list and description of hot-swap
CRUs.
142 Removing and Replacing Components