HP Integrity rx8640, HP 9000 rp8440 Server User Service Guide

Replacing the Rear Smart Fan Assembly
1. Position the fan assembly in the chassis.
2. Slide the fan into the connector.
3. Tighten the two thumb screws to secure the fan to the chassis.
4. The LED should be Green. See Table 34 for a listing of LED definitions.
Removing and Replacing a Disk Drive
The disk drive is located in the front of the chassis. Internal disk drives are hot-plug components.
See “Hot-Plug CRUs” (page 133) for a list and description of hot-plug CRUs.
Figure 82 Disk Drive Location
Disk Drives
Removing the Disk Drive
1. Disengage the front locking latch on the disk drive by pushing the release tab to the right and
the latch lever to the left.
2. Pull forward on the front locking latch and carefully slide the disk drive from the chassis
(Figure 83),
146 Removing and Replacing Components