HP Integrity rx8640, HP 9000 rp8440 Server User Service Guide

Figure 84 Removable Media Drive Location
Removable Media Drives
Removing the Removable Media Drive
NOTE: When removing the bottom drive, remove the top drive first.
1. Identify the failed removable media drive.
2. Turn off the power to the server.
3. Connect to ground with a wrist strap. See “Electrostatic Discharge ” (page 134) for more
information.
4. Remove the front bezel.
5. Push the front locking tab inward to detach the drive from the chassis (Figure 85).
6. Pull the drive out of the chassis. to expose the rear connectors.
7. Unhook the cables from the rear of the drive.
8. Slide the drive from the chassis.
9. Remove the rails and clips from the drive.
Figure 85 Removable Media Drive Detail
148 Removing and Replacing Components