HP Integrity rx8640, HP 9000 rp8440 Server User Service Guide

Replacing the Removable Media Drive
NOTE: If applicable, install the bottom drive before installing the top drive.
1. Attach the rails and clips to the drive.
2. Connect the cables to the rear of the drive.
3. Position the drive in the chassis.
4. Turn the power on to the server.
5. Verify operation of the drive. Enter the SEArch or INFO command at the EFI Shell to ensure
that the system recognizes the drive.
Removing and Replacing a PCI Card
The PCI cards are located in the rear of the chassis in the PCI card cage (Figure 86). PCI cards
are hot-plug components. See “Hot-Plug CRUs” (page 133) for a list and description of hot-plug
CRUs.
IMPORTANT: Complete information regarding OL* for I/O cards is on the Web at http://
www.hp.com/go/bizsupport. See the Interface Card OL* Support Guide for details by entering
the title of the guide into the search field to locate. It is strongly recommended that you obtain a
copy of this document and review it before beginning the removal and replacement of PCI cards.
Figure 86 PCI Card Location
Removing the PCI Card
PCI I/O OL* Card Methods
Following are three methods for performing OL* operations on PCI I/O cards.
pdweb The Peripheral Device Tool (pdweb) Web-based method of performing
OL*.
Removing and Replacing a PCI Card 149