HP Integrity rx8640, HP 9000 rp8440 Server User Service Guide

B Management Processor Commands
This appendix contains a list of the server management commands.
Server Management Commands
Table 42 lists the server m anagement commands.
Table 42 Management Commands
DescriptionCommand
Boot a partitionBO
Display CRU Information of an EntityDF
Return to Main MenuMA
ObsoleteOSP
Power entities on or offPE
Reset entityRE
Reset partition for reconfigurationRR
Reset a partitionRS
Returns all System RevisionsSYSREV
Send a TOC signal to a partitionTC
Broadcast a message to all users of the MP command handlerTE
Display list of MP connected usersWHO
Display and Set Locator LED statusLOC
Table 43 lists the server status commands
Table 43 Status Commands
DescriptionCommand
Display partition cell assignmentsCP
Display the list of available commandsHE
Display LAN connected console statusLS
Display modem statusMS
Display detailed power and hardware configuration statusPS
Table 44 lists the server system and access configuration commands
Table 44 System and Access Configuration Commands
DescriptionCommand
Configure Asynchronous and Modem parametersCA
Initiate a Complex ConfigurationCC
Generate ssl key pair and self signed certificateCG
Display partition cell assignmentsCP
Set the time and dateDATE
168 Management Processor Commands