HP Integrity rx8640, HP 9000 rp8440 Server User Service Guide

Figure 11 Removing the Shipping Bolts and Plastic Cover
6. Remove the six bolts from the base that attaches the rack to the pallet.
Figure 12 Preparing to Roll Off the Pallet
WARNING! Be sure that the leveling feet on the rack are raised before you roll the rack
down the ramp, and any time you roll the rack on the casters. Use caution when rolling the
cabinet off the ramp. A single server in the cabinet weighs approximately 508 lb. It is strongly
recommended that two people roll the cabinet off the pallet.
Receiving and Inspecting the Server Cabinet 35