HP Integrity rx8640, HP 9000 rp8440 Server User Service Guide

Figure 15 Raising the Server Off the Pallet Cushions
6. Carefully roll the lifter and server away from the pallet. Do not raise the server any higher
than necessary when moving it over to the rack.
7. Follow the HP J1528B Rack Integration Kit Installation Guide to complete these steps:
• Mounting the server to the slides
• Installing the cable management arm (CMA)
• Installing the interlock device assembly (if two servers are in the same cabinet)
Installing the Wheel Kit
Compare the packing list (Table 19) with the contents of the wheel kit before beginning the
installation. For a more updated list of part numbers, go to the HP Part Surfer web site at: http://
partsurfer.hp.com/.
Table 19 Wheel Kit Packing List
QuantityDescriptionPart Number
2Caster coverA9904-04002
1Right side coverA9904-04007
1Left side coverA9904-04008
1Top coverA9904-04009
1Right front caster assemblyA6093-04082
1Right rear caster assemblyA6093-04083
1Left front caster assemblyA6093-04084
1Left rear caster assemblyA6093-04085
Installing the Wheel Kit 39