HP Integrity rx8640, HP 9000 rp8440 Server User Service Guide

Figure 18 Attaching a Caster Wheel to the Server
Front Casters
8. Attach the remaining front caster to the server using two more screws supplied in the plastic
pouch.
9. Remove the rear cushion at the rear of the server. Do not remove the remaining cushions.
10. Mount the two rear casters to the server using the remaining four screws.
11. Obtain the plywood ramp from the wheel kit.
12. The ramp has two predrilled holes (Figure 19). Attach the ramp to the edge of the pallet using
the two screws taped to the ramp.
Figure 19 Attaching the Ramp to the Pallet
Pre-drilled holes
42 Installing the System