HP Integrity rx8640, HP 9000 rp8440 Server User Service Guide

Figure 21 Securing Each Caster Cover to the Server
Front Casters
Rear Casters
Caster Covers
Captive Screw
17. Snap the bezel cover into place on the front of the server. Figure 22 shows the server cabinet
with the wheel kit installed.
Figure 22 Completed Wheel Kit Installation
Attached Caster Cover
Installing the Top and Side Covers
This section describes the procedures for installing the top and side server covers.
NOTE: You may be need to remove existing top and side covers installed on the server before
installing the covers shipped with the wheel kit. If cover removal is not needed, go directly to the
next sections for installing the top and side cover.
44 Installing the System