HP Integrity rx8640, HP 9000 rp8440 Server User Service Guide

Table 21 HP 9000 rp8440 Server PCI-X I/O Cards (continued)
n/an/an/aHP-UXCard DescriptionPart Number
64-Port Terminal MUXAD279A
1
bPCI/PCI-X 1–port 1000b-T AdapterAD331A
1
bPCI/PCI-X 1–port 1000b-SX AdapterAD332A
1
2-port Serial (X25/FR/SDLC)J3525A
1
B- Supports Mass Storage Boot
b- Supports LAN Boot
Bb- Supports Mass Storage and LAN Boot
1. Available with Factory Integration
IMPORTANT: The above list of part numbers is current and correct as of September 2007. Part
numbers change often. Check the following website to ensure you have the latest part numbers
associated with this server: http://partsurfer.hp.com/
Installing an Additional PCI-X I/O Card
IMPORTANT: While the installation process for PCI/PCI-X cards and PCIe cards is the same,
PCIe cards are physically smaller than PCI-X cards and are not interchangeable. Check Table 8
(page 23) to verify the slot types and order.
NOTE: The PCI I/O card installation process varies depending on what version of the HP-UX
operating system you are running on your system. PCI I/O card installation procedures should be
downloaded from the http://www.hp.com/go/bizsupport Web site. Select a following guide and
enter the title in the search field for background information and procedures to add a new PCI I/O
card using online addition:
nPartition Administrator's Guide
Interface Card OL* Support Guide for HP-UX 11.23
HP Lights Out Advanced/KVM Card
Overview
The Lights Out Advanced/KVM Card (LOA) is a PCI-X accessory card that can be installed into
any sx2000–based Integrity server to enable the advanced virtual graphics console (vKVM) and
virtual CD/DVD/ISO file (vMedia) features of the Integrity Lights Out Management Processor
(iLO/MP). The LOA card is also a graphics/USB card that offers physical video functionality for
servers running Windows, and USB functionality for servers running HP-UX, Windows, and
OpenVMS. All Lights Out Advanced features are fully enabled on the LOA card — there is no
additional “advanced pack” license to purchase. At present, vKVM is only available for servers
running Windows and vMedia is available for servers running HP-UX, Windows, and OpenVMS.
There are no current plans to support the LOA card under Linux.
The removal and replacement processes for the LOA card is detailed in “Removing and Replacing
a PCI Card” (page 149).
Slotting Rules
Installing Additional Cards and Storage 53