Site Preparation Guide, Third Edition - HP Integrity rx8640 Server Expansion Unit

Each PCI/PCI-X slot has a host-to-PCI bridge associated with it, and each PCIe slot has a
host-to-PCIe bridge associated with it. A dual slot hot swap controller chip and related logic is
also associated with each pair of PCI or PCIe slots. The I/O chip on either cell location 0 or 1 is a
primary I/O system interface. Upstream, the I/O chips communicate directly with the cell controller
ASIC on the host cell board via a high bandwidth logical connection known as the HSS link.
When installed in the SEU chassis within a fully configured system, The ASIC on cell location 0
connects to the cell controller chip on cell board 2 and the ASIC on cell location 1 connects to the
cell controller chip on cell board 3 through external link cables.
Downstream, the ASIC spawns 16 logical 'ropes' that communicate with the core I/O bridge on
the system backplane, PCI interface chips, and PCIe interface chips. Each PCI chip produces a
single 64-bit PCI-X bus supporting a single PCI or PCI-X add-in card. Each PCIe chip produces
a single x8 PCI-Express bus supporting a single PCIe add-in card.
The ropes in each I/O partition are distributed as follows:
One PCI-X ASIC is connected to each I/O chip with a single rope capable of peak data rates of
533MB/s (PCIX-66). Three PCI-X ASICs are connected to each I/O chip with dual ropes capable
of peak data rated of 1.06 GB/s (PCIX-133). Four PCIe ASICs are connected to each I/O chip with
dual fat ropes capable of peak data rates of 2.12 GB/s (PCIe x8). In addition, each I/O chip provides
an external single rope connection for the core I/O.
Each PCI-Express slot on the PCI-X/PCIe I/O backplane is controlled by its own ASIC and is also
independently supported by its own half of the dual hot swap controller. All PCIe slots are
designed to be compliant with PCIe Rev.1.0. The PCI-Express I/O backplane will provide slot
support for VAUX3.3, SMB*, and JTAG.
PCI-X/PCIe I/O Backplane Slot Boot Paths
PCI-X/PCIe I/O backplane slot boot paths are directly leveraged from the PCI-X backplane. See
“PCI-X Slot Boot Paths” (page 15) for more details.
16 Server Expansion Unit Overview