User Service Guide, Fifth Edition - HP Integrity rx8640 SEU

3 Installing the Server Expansion Unit
The following instructions are included for unpacking a racked SEU. There are also instructions
for unpacking a non-racked SEU.
Inspect shipping containers when the equipment arrives at the site. Check equipment after the
packing has been removed. This chapter discusses how to inspect and receive the SEU.
Inspecting the Server Cabinet
NOTE: The server will ship in one of three different configurations. The configurations are:
• on a pallet installed in a server cabinet
• on a pallet for rack mount into an existing cabinet on the customer site
• on a pallet with a wheel kit for installation as a standalone server
HP shipping containers are designed to protect their contents under normal shipping conditions.
After the equipment arrives at the customer site, carefully inspect each carton for signs of shipping
damage. A tilt indicator is installed on each carton shipped. The beads in the indicator will roll
to the upper position if the container has been tilted to an angle that could cause equipment
damage. The tilt indicator itself will have two windows and each window under normal conditions
will show four beads present. If a carton has been mishandled, accidentally dropped, or knocked
against something, the tilt indicator will indicate missing beads. If damage is found, document
the damage with photographs and contact the transport carrier immediately.
Examine the server cabinet for visible shipping damage. After unpacking the cabinet, check for
damage that may have been obscured by the shipping container. If damage is found after visual
inspection, document the damage with photographs and contact the transport carrier immediately.
If the equipment has any damage, a damage claim form must be obtained by the customer from
the shipping representative. The customer should complete the form and return it to the shipping
representative.
NOTE: The factory provides an installation warranty that is effective from the time the customer
receives the shipment until Field Services turns the system over to the customer.
Upon inspection of a received system and during installation of the system, if any parts or
accessories are missing or defective, they will be replaced directly from the factory by a priority
process. To request replacement parts, the HP Installation Specialist must contact the local Order
Fulfillment group which will coordinate the replacement with the factory.
Unpacking the Server Expansion Unit
HP shipping containers are designed to protect their contents under normal shipping conditions.
After the equipment arrives, carefully inspect each carton for signs of shipping damage. A tilt
indicator is installed on each carton shipped. The beads in the indicator roll to the upper position
if the container has been tilted to an angle that could cause equipment damage. The tilt indicator
itself has two windows and each window, under normal conditions, shows four beads present.
If a carton has been mishandled, accidentally dropped, or knocked against something, the tilt
indicator will indicate missing beads. If damage is found, document the damage with photographs
and contact the transport carrier immediately.
Examine the SEU cabinet for visible shipping damage. After unpacking the cabinet, check for
damage that may have been obscured by the shipping container. If damage is found after visual
inspection, document the damage with photographs and contact the transport carrier immediately.
Inspecting the Server Cabinet 33