User Service Guide, Fifth Edition - HP Integrity rx8640 SEU

6. Remove the six bolts from the base attaching the rack to the pallet. See Figure 3-3.
Figure 3-3 Preparing to Roll Off the Pallet
WARNING! Be sure that the leveling feet on the rack are raised before you roll the rack
down the ramp and any time you roll the rack on the casters. Use caution when rolling the
cabinet off the ramp. A single server in the cabinet weighs several hundred pounds. HP
strongly recommends that two people roll the cabinet off the pallet.
Securing the Cabinet
When in position, secure and stabilize the cabinet, using the leveling feet at the corners of the
base. Install the anti-tip mechanisms on the bottom front and rear of the rack.
Figure 3-4 Securing the Cabinet
Unpacking a Non-Racked SEU
HP recommends the use of a lifter shown in Figure 3-5 such as a RonI Company model 17000
SP 400 lifting device when moving a non-racked system.
Unpacking a Non-Racked SEU 37