User Service Guide, Fifth Edition - HP Integrity rx8640 SEU

NOTE: After turning on the 48V sub system, wait 1–2 minutes for the partition configuration
(complex A, B & C configurations) information to be transferred to the core I/O cards.
To determine this has been accomplished, log in to the MP and view the MP Main Menu
selections available. The CO: Consoles option is not available until the transfer of partition
configuration is complete. See examples below.
Partition Configuration Information Has Not Been Transferred
MP MAIN MENU:
VFP: Virtual Front Panel (partition status)
CM: Command Menu
CL: Console Logs
SL: Show chassis Logs
HE: Help
X: Exit Connection
MP>
Partition Configuration Information Has Been Transferred Press the enter key to refresh the
screen and receive a similar screen below.
MP MAIN MENU:
CO: Consoles
VFP: Virtual Front Panel (partition status)
CM: Command Menu
CL: Console Logs
SL: Show chassis Logs
HE: Help
X: Exit Connection
MP>
3. Verify the firmware revisions using the sysrev command.
MP:CM> sysrev
Cabinet firmware revision report
PROGRAMMABLE HARDWARE :
System Backplane : GPM EMMUX
----------- -----------
001.002.000 001.000.000
IO Backplane : IO_LPM-0 IO_LPM-1
----------- -----------
001.003.000 001.003.000
Core IO : CIO-0 CIO-1
----------- -----------
001.002.000 001.002.000
CELL_LPM CELL_JTAG CELL_PDH
----------- ----------- -----------
Cell 0 : 001.002.000 001.002.000 001.005.001
Cell 1 : 001.002.000 001.002.000 001.005.001
Cabling and Power Up 69