User Service Guide, Fifth Edition - HP Integrity rx8640 SEU

Cell 2 : 001.002.000 001.002.000 001.005.001
Cell 3 : 001.002.000 001.002.000 001.005.001
FIRMWARE:
Core IO
MP-0 : B.002.005.012
ED-0 : 002.007.000
MP-1 : B.002.005.012
ED-1 : 002.007.000
Cell 0
PDHC : B.023.003.038 - Active
PDHC : B.023.003.037
PDC_FW : 043.006.000 - Active
PDC_FW : 043.005.000
Cell 1
PDHC : B.023.003.038 - Active
PDHC : B.023.003.037
PDC_FW : 043.006.000 - Active
PDC_FW : 043.005.000
Cell 2
PDHC : B.023.003.038 - Active
PDHC : B.023.003.037
PDC_FW : 043.006.000 - Active
PDC_FW : 043.005.000
Cell 3
PDHC : B.023.003.038 - Active
PDHC : B.023.003.037
PDC_FW : 043.006.000 - Active
PDC_FW : 043.005.000
IO Cabinet FPGA and Firmware revision report
PROGRAMMABLE HARDWARE :
System Backplane : GPM EMMUX
----------- -----------
001.002.000 001.000.000
IO Backplane : IO_LPM-0 IO_LPM-1
----------- -----------
001.003.000 001.003.000
Core IO : CIO-0 CIO-1
----------- -----------
001.002.000 001.002.000
FIRMWARE:
Core IO
MP-0 : B.002.005.012
ED-0 : 002.007.000
MP-1 : B.002.005.012
ED-1 : 002.007.000
4. Boot the server to the HP-UX operating system login prompt.
5. Log in and execute the ioscan (using the desired options) command to verify the new SEU
I/O paths are available for use.
70 Installing the Server Expansion Unit