User Service Guide, Fifth Edition - HP Integrity rx8640 SEU

IMPORTANT: The MP LAN, local and remote console ports are never functional for a core I/O
card installed in the SEU.
The system LAN and UPS ports are not functional until the operating system is configured and
running.
Figure 4-6 Core I/O Card Bulkhead LEDs
Table 4-6 Core I/O LEDs
DescriptionStateLED (as silk-screened on
the bulkhead)
SCSI termpower is onOn GreenSCSI TRM
SCSI LVD mode (on = LVD, off = SE)On GreenSCSI LVD
PCI attentionOn YellowATTN
I/O power onOn GreenPWR
SYS LAN in 10 BT modeOn GreenSYS LAN 10 BT
SYS LAN in 100 BT modeOn GreenSYS LAN 100 BT
SYS LAN in 1Gb modeOn GreenSYS LAN 1Gb
Indicates SYS LAN activityOn GreenSYS LAN ACT
SYS LAN link is okOn GreenSYS LAN LINK
Locater LEDOn BlueLocate
Indicates that the MP is being resetOn RedReset
MP LAN in 10 BT modeOn GreenMP LAN 10 BT
MP LAN in 100 BT modeOn GreenMP LAN 100 BT
Indicates MP LAN activityOn GreenMP LAN ACT
MP LAN link is OKOn GreenMP LAN LINK
This core I/O is managing the systemOn GreenActive
Indicates standby power is onOn GreenMP Power
Disk Drive LEDs
There are two tri-color LED on each disk drive.
SEU LED Indicators 77