Windows Integrity Management Agents Reference

Event DescriptionEvent SeverityEvent ID
The Remote Alerter Agent detected an error while attempting to log an alert remotely.
The data contains the error code.
Warning
769
The Remote Alerter Agent was unable to log an event in the event log of the system
named %1. The data contains the error code.
Warning
771
The Remote Alerter Agent detected a null handle on initialization. The data contains
the error code.
Error
772
The Remote Alerter Agent received an error on WaitForMultipleObjects call. The
data contains the error code.
Error
773
The Remote Alerter Agent received an error on ResetEvent call. The data contains
the error code.Error774
Drive Array Physical Drive Threshold Exceeded. The physical drive in slot %4, port
%5, bay %6 with serial number "%7", has exceeded a drive threshold.%n [SNMP
TRAP: 3030 in CPQIDA.MIB]Error1061
Drive Array Logical Drive Status Change. Logical drive number %5 on the array
controller in slot %4 has a new status of %2.%n(Logical Drive status values: 1=other,
2=ok, 3=failed, 4=unconfigured, 5=recovering, 6=readyForRebuild, 7=rebuilding,
8=wrongDrive, 9=badConnect, 10=overheating, 11=shutdown, 12=expanding,
13=notAvailable, 14=queuedForExpansion)%n [SNMP TRAP: 3008 in CPQIDA.MIB]Error1062
Drive Array Spare Drive Status Change. The spare drive in slot %4, port %5, bay %6
has a new status of %2.%n(Spare status values: 1=other, 2=invalid, 3=failed, 4=inactive,
5=building, 6=active)%n [SNMP TRAP: 3017 in CPQIDA.MIB]Error1063
Drive Array Physical Drive Status Change. The physical drive in slot %4, port %5,
bay %6 with serial number "%7", has a new status of %2.%n(Drive status values:
1=other, 2=ok, 3=failed, 4=predictiveFailure)%n[SNMP TRAP: 3029 in CPQIDA.MIB]Error1064
Drive Array Accelerator Status Change. The array accelerator board attached to the
array controller in slot %4 has a new status of %2.%n(Accelerator status values:
1=other, 2=notConfigured, 3=enabled, 4=tmpDisabled, 5=permDisabled)%n [SNMP
TRAP: 3025 in CPQIDA.MIB]Error1065
Drive Array Accelerator Bad Data. The array accelerator board attached to the array
controller in slot %4 is reporting that it contains bad cached data.%n[SNMP TRAP:
3026 in CPQIDA.MIB]Error1066
Drive Array Accelerator Battery Failed. The array accelerator board attached to the
array controller in slot %4 is reporting a battery failure.%n[SNMP TRAP: 3027 in
CPQIDA.MIB]Error1067
SCSI Controller Status Change.%nThe SCSI controller in slot %4, SCSI bus %5 has a
new status of %2.%n(Controller status values: 1=other, 2=ok, 3=failed)%n[SNMP
TRAP: 5005 in CPQSCSI.MIB]Error1068
SCSI Logical Drive Status Change.%nThe SCSI logical drive with SCSI target %6
connected to SCSI bus %5 of the controller in slot %4 has a new status of %2.%n(Drive
status values: 1=other, 2=ok, 3=failed, 4=unconfigured, 5=recovering,
6=readyForRebuild, 7=rebuilding, 8=wrongDrive, 9=badConnect, 10=degraded,
11=disabled)%n [SNMP TRAP: 5021 in CPQSCSI.MIB]Error1069
SCSI Physical Drive Status Change.%nThe SCSI physical drive with SCSI target %6
connected to SCSI bus %5 of the controller in slot %4 has a new status of %2.%n(Drive
status values: 1=other, 2=ok, 3=failed, 4=notConfigured, 5=badCable, 6=missingWasOk,
7=missingWasFailed, 8=predictiveFailure, 9=missingWasPredictiveFailure, 10=offline,
11=missingWasOffline)%n [SNMP TRAP: 5020 in CPQSCSI.MIB]Error1070
Storage System Fan Status Change.%nThe %6 %7 storage system connected to SCSI
bus %5 of the controller in slot %4 has a new status of %2.%n(Fan status values:
1=other, 2=ok, 3=failed, 4=notInstalled, 5=degraded)%n [SNMP TRAP: 8008 in
CPQSTSYS.MIB]Warning1075
Storage Agent Events 119