Windows Integrity Management Agents Reference

Event DescriptionEvent SeverityEvent ID
Storage System Temperature Status Change.%nThe %6 %7 storage system connected
to %5 of the controller in %4 has a new temperature status of %2.%n(Temperature
status values: 1=other,2=ok,3=degraded,4=failed,5=notInstalled) %n [SNMP TRAP:
8030 in CPQSTSYS.MIB]Warning1219
Storage System Fault Tolerant Power Supply Status Change.%nThe fault tolerant
power supply in the %6 %7 storage system connected to %5 of the controller in %4
has a new status of %2.%n(Power supply status values: 1=other,2=ok,3=degraded,
4=failed,5=notInstalled)%n [SNMP TRAP: 8031 in CPQSTSYS.MIB]Warning1220
SAS/SATA Physical Drive Status Change. The physical drive in %4, %5 with serial
number "%6", has a new status of %7. %n(Drive status values: 1=other, 2=ok,
3=predictiveFailure, 4=offline, 5=failed, 6=missingWasOk,
7=missingWasPredictiveFailure, 8=missingWasoffline, 9=missingWasFailed) %n
[SNMP TRAP: 5022 in CPQSCSI.MIB]Warning1221
SAS/SATA Logical Drive Status Change. Logical drive number %5 on the HBA in
%4 has a new status of %6.%n(Logical Drive status values: 1=other, 2=ok, 3=degraded,
4=rebuilding, 5=failed) %n [SNMP TRAP: 5023 in CPQSCSI.MIB]Warning1222
SAS Tape Drive Status Change. The tape drive in %4, %5 with serial number "%6",
has a new status of %7. %n(Tape Drive status values: 1=other, 2=ok, 3=offline) %n
[SNMP TRAP: 5025 in CPQSCSI.MIB]Warning1223
Error: Unable to allocate memory. Cause: This indicates a low memory condition.
Rebooting the system will correct this error.Warning1280
Error: Could not read from the registry subkey. Cause: This error can be caused by
a corrupt registry or a low memory condition. Rebooting the server may correct this
error.Warning1281
Error: Could not write the registry subkey: "%1". Cause: This error can be caused by
a corrupt registry or a low memory condition. Rebooting the server may correct this
error.Warning1282
Error: Could not read the registry subkey: "%1". Cause: This error can be caused by
a corrupt registry or a low memory condition. Rebooting the server may correct this
error.Warning1283
Error: Could not write the registry subkey: "%1". Cause: This error can be caused by
a corrupt registry or a low memory condition. Rebooting the server may correct this
error.Warning1284
Error: Could not write the registry subkey: "%1". Cause: This error can be caused by
a corrupt registry or a low memory condition. Rebooting the server may correct this
error.Warning1285
Error: Unsupported storage system. Cause: The Proliant storage system %1 is
unsupported by this version of the Storage Agents. Upgrade the agents to the latest
version.Warning1294
Error: Duplicate SCSI port found in slot %1. Cause: The current system ROM may
not support this SCSI controller. You may need to update your system ROM.Warning1343
Error: A version mismatch has been detected with the SCSI device monitor driver
(CPQSDM.SYS). The current driver version is %1. Cause: You may not have rebooted
after a Storage Agents upgrade. Always reboot the system after a installing agents.Warning1344
Error: The SCSI controller on port %1 has been omitted. Cause: The SCSI Agent could
not get the slot data for the controller.Warning1346
Error: The SNMP Agent is unable to genereate traps due to an error during
initialization. Cause: Check to ensure that the SNMP service is running. Reinstalling
the agents may fix this error.Warning1792
Error: The SNMP Agent is older than other components. Cause: The SNMP Agent
is older than the other components of the Storage Agents. Reinstall the entire Storage
Agents package to correct this error.Warning1795
Storage Agent Events 125