HP Integrity Superdome 2 Onboard Administrator Command Line Interface User Guide

1 Cisco Catalyst Blade Switch 3120 Disabled
2 Absent Disabled
3 Absent Disabled
4 Absent Disabled
SHOW INTERCONNECT STATUS
• Command:
SHOW INTERCONNECT STATUS {ALL | <bay number>
| <bay number>-<bay number>}
• Description:
Displays interconnect status information; UID state and health state
• Access level/Bay level:
All◦
◦ Bay specific
• Restrictions:
You must have explicit access to a bay given by the ASSIGN INTERCONNECT command.
• Example:
OA-0018FE27577F> SHOW INTERCONNECT STATUS ALL
Interconnect Module #1 Status:
Status : OK
Thermal: OK
CPU Fault: OK
Health LED: OK
UID: Off
Powered: On
Diagnostic Status:
Internal Data OK
Management Processor OK
Thermal Warning OK
Thermal Danger OK
I/O Configuration OK
Device Failure OK
Device Degraded OK
Interconnect Module #2 Status:
Interconnect Module Type: No Interconnect Module Installed
Interconnect Module #3 Status:
Interconnect Module Type: No Interconnect Module Installed
Interconnect Module #4 Status:
Interconnect Module Type: No Interconnect Module Installed
SHOW XFM INFO
• Command:
SHOW XFM INFO { ALL | <xfm_number> {[ - | , ] <xfm_number>} }
SHOW INTERCONNECT STATUS 115