HP Integrity Superdome 2 User Service Guide

DescriptionNameItem
Off = Ok
Flashing red = Deconfigured
1
Solid green = Link OK, transmitting at full bandwidth. Alternating green/yellow = Link in service, safe to remove. Flashing
yellow = Deconfigured link, safe to remove.
CAUTION: Always use the HR user interface stop link command before disconnecting the
Superdome 2 crossbar fabric cable. The stop link will allow safe servicing and set the LED endpoints
for easy location.
After servicing, the HR start link command will enable re-use of the link.
GPSM LEDs and components
DescriptionNameItem
Door display power connector1
Blue = UID onUID LED2
Flashing yellow = Degraded, indictedHealth LED3
Off = Ok
Flashing red = Deconfigured
Link and Activity LEDs detailed below.CAMNet port 14
Link and Activity LEDs detailed below.CAMNet port 25
Link and Activity LEDs detailed below.CAMNet port 36
Link and Activity LEDs detailed below.CAMNet port 47
Link and Activity LEDs detailed below.CAMNet port 58
Link and Activity LEDs detailed below.CAMNet port 69
Link and Activity LEDs detailed below.CAMNet port 710
Link and Activity LEDs detailed below.CAMNet port 811
Indicates the status of the global clock
signal distributed to blades in the
enclosure.
Local Clock Distribution LED12
Green = OK
60 Troubleshooting