HP Integrity Superdome 2 WEEE Disassembly Instructions HP Part Number: AH337-9009A Published: August 2010 Edition: 1
Copyright © 2010 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.
1 Product End-of-Life Disassembly Instructions The Waste from Electric and Electronic Equipment (WEEE) Disassembly Instructions manual is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions for the disassembly of this product to remove components and materials requiring selective treatment. Models and Descriptions This document provides disassembly instructions for the products listed.
Components and waste containing asbestos None Components, parts and materials containing refractory ceramic fibers None Components, parts and materials containing radioactive substances None HP Integrity Superdome 2 compute enclosure The following table lists the classified items requiring selective treatment for the HP Integrity Superdome 2 compute enclosure. Item Description Notes Qty.
HP Integrity Superdome 2 IOX The following table lists the classified items requiring selective treatment for the HP Integrity Superdome 2 I/O expansion enclosure Item Description Notes Qty. of Items Included in Product Printed Circuit Boards (PCB) or Printed Circuit Assemblies (PCA) With a surface greater than 10 cm2. Up to 16 Batteries All types including standard alkaline None and lithium coin or button style batteries.
Product Disassembly Process The following table lists the basic steps that you should follow to remove components and materials requiring selective treatment. 6 Step Process 1 Battery – locate battery and remove by hand or small flat blade screw driver. 2 Capacitor – locate capacitor and pry from the printed circuit board with a large flat head screw driver. 3 Printed Circuit Boards – follow removal instructions found in the system specific documentation if needed.
