HP Release sets for HP Superdome 2 servers

(bundles
several IO
EFI and
FW drivers
for the SD2
system)
BRCM57711E based
NIC/LOM
(Broadcom 10 Gb Ethernet
Driver) : 5.2.59
- EFI driver for PCIe based
Gigabit Ethernet : 4.3.01
- EFI driver and FW for
Emulex PCIe 8 Gb FC:
4.01a5 (UBC 5.03A15)
- Ethernet and CNA cards:
4.1.450.14
BRCM57711E based
NIC/LOM
(Broadcom 10 Gb Ethernet
Driver) : 5.2.59
- EFI driver for PCIe based
Gigabit Ethernet : 4.3.01
- EFI driver and FW for
Emulex PCIe 8 Gb FC:
4.01a5 (UBC 5.03A15)
- Ethernet and CNA cards:
4.1.450.14
- Emulex LOM SD2 5.2.59
based NIC/LOM
(Broadcom 10 Gb Ethernet Driver)
: 5.2.60
- EFI driver for PCIe based
Gigabit Ethernet : 4.3.02
- EFI driver and FW for Emulex
PCIe 8 Gb FC: 4.01a5 (UBC
5.03A15)
- Ethernet and CNA cards:
4.2.401.20212
- Emulex LOM SD2 5.2.60
Add on IO
HP
Superdome
IO
Note: The versions below
are also available in the IO
components for HP SUM
5.3.0 or later posted on
the Superdome 2
download page.
Infiniband firmware flash
2012.11.30
Emulex firmware flash
2013.02.18
Qlogic firmware flash
2012.11.30
Add-in Smart Array
firmware flash 2013.02.18
Intel and Broadcom
firmware flash
2012.11.30(b)
Networking:
» PCIe 2 or 4-port 1GbE
card (AD337A, AD338A,
AD339A): EFI 4.3.01
» PCIe 10 GbE SR/LR/CR
(AM225A/AM232A/AM233
A): EFI 5.2.58 (Boot Code
6.2.21) 5.2.59 (Boot Code
6.2.25)
» Embedded IO: EFI
5.02.59 / FW 6.2.25
» PCIe 2-port NC552SFP
10 GbE (AT118A): EFI
4.1.450.14/2.21AC
FCoE:
» PCIe 2-port CN1100E
CNA (AT111A):
EFI 4.1.450.14/2.21AC
(includes EFI FCoE 5.02.a4)
Smart Array:
» P411/256MB (AM311A)
EFI Version: 6.22
» P812/1GB (AM312A) EFI
Version: 6.22
Fibre Channel
» PCIe 8Gb FC SR 1p/2p
Qlogic (AH400A/AH401A):
Note: The versions below
are also available in the IO
components for HP SUM
5.3.0 or later posted on
the Superdome 2
download page.
Infiniband firmware flash
2012.11.30
Emulex firmware flash
2013.05.02
Qlogic firmware flash
2012.11.30, 2013.07.18
Add-in Smart Array
firmware flash 2013.02.18,
2013.09.25
Intel and Broadcom
firmware flash
2012.11.30(d)
EFI install, for Intel and
Broadcom devices if
IEXGBE-DRV version is
less than B.11.31.1303
Broadcom Integrity
firmware flash 2013.06.05
an LOM 5.2.59 – HP-UX
install, for Broadcom
devices if IEXGBE-DRV
version is B.11.31.1303 or
higher
Networking:
» PCIe 2 or 4-port 1GbE
card (AD337A, AD338A,
AD339A): EFI 4.3.01
» PCIe 10 GbE SR/LR/CR
(AM225A/AM232A/AM233
A): 5.2.59 (Boot Code
6.2.25)
» Embedded IO: EFI
5.02.59 / FW 6.2.25
» PCIe 2-port NC552SFP
10 GbE (AT118A): EFI
4.2.401.2212/2.21AC
FCoE:
Note: The versions below are
also available in the IO
components for HP SUM 5.3.0
or later posted on the
Superdome 2 download page.
Infiniband firmware flash
2012.11.30
Emulex firmware flash
2013.05.02
Qlogic firmware flash 2014.02.14
Add-in Smart Array firmware
flash 2013.09.25
Intel and Broadcom firmware flash
2014.04.21
EFI install, for Intel and Broadcom
devices if IEXGBE-DRV version is
less than B.11.31.1303
Broadcom Integrity firmware
flash 2014.2.18 and SD2 LOM
5.2.60 – HP-UX install, for
Broadcom devices if IEXGBE-
DRV version is B.11.31.1303 or
higher
Networking:
» PCIe 2 or 4-port 1GbE card
(AD337A, AD338A, AD339A):
EFI 4.3.02
» PCIe 10 GbE SR/LR/CR
(AM225A/AM232A/AM233A):5.2.
60 (Boot Code 6.2.28)
» Embedded IO: EFI 5.02.60 /
ROM 6.2.28
» PCIe 2-port NC552SFP 10 GbE
(AT118A): EFI
4.2.401.2212/2.21AC
FCoE:
» PCIe 2-port CN1100E CNA
(AT111A):
EFI 4.2.401.2212/2.21AC
(includes EFI FCoE 5.10.a7)
Smart Array:
» P411/256MB (AM311A) EFI
Version: 6.22, 6.42
» P812/1GB (AM312A) EFI