HP Superdome 2 Partitioning Administrator Guide HP-UX 11i v3 (766170-001, May 2014)

Removing blades and I/O bays from an nPartition using the OA GUI
To unassign blades and I/O bays from an nPartition using the OA GUI:
1. Select the nPartition from the left navigation pane, and then click modify nPartition.
2. Expand the Blade Resources option.
Figure 9 (page 45) shows the blade resource screen.
Figure 11 Blade Resources Option
3. Clear the blade resources that you want to unassign from the nPartition.
4. Expand the IOX Resources option.
Figure 10 (page 46) shows the IOX Resources screen.
Removing blades and I/O bays from an nPartition 47