LIFT-O-FLEX® 17000 SP 400 Manual

Lift-O-Flex 17000 SP 400 Manual
Page 2 Rev July 01
1. LIFT-O-FLEX 17000 SP 400
LIFT-O-FLEX® is a registered trademark of RONI, LLC, Charlotte NC.
NOTE: It is important that you read and fully understand this manual before using your Lift-
O-FlexLifter. If you have any questions contact your distributor or the
manufacturer.
GENERAL DATA
• Type
LIFT-O-FLEX® 17000 SP 400
• Total Lift Capacity • 400-lbs. (includes load weight and end-effector)
• Certification • CE Marked
• Material • Chassis – Aluminum - Powder Coat Finish
• Lift Mast - Aluminum.
• End-Effector-stainless steel, 304.
• Lifter Weight (with End-Effector) • ~84-lbs.
• Weighted average for vibrations
during operation
• Not to exceed 2.5 m/s2
• Operational Sound Level • Not to exceed 70 dB (A)
• Declaration of Conformity • Delivered with each lifter
• Labeling • Manufacturer
• Year of Manufacture
• Serial Number
GOOD WORKING ENVIRONMENT
LIFT-O-FLEX lifters are designed to ergonomically assist in material handling operations. By using the
lifter, the prevention or elimination of injuries as well as the creation of safer working conditions for
personnel will occur. People that already suffer from injuries or have suffered injuries will find that the
lifter will enhance productivity. The lifter is designed for use in warehouses, industrial plants, institutional
kitchens, drug stores, post offices, etc.
FLEXIBLE
LIFT-O-FLEX can lift and transport boxes, totes, rolls, etc. up to a weight of 400lb. The end-effector is
electrically lifted and lowered. A lift height of 60” from the floor is provided for your material handling
needs.