HP Integrity Superdome 2 Onboard Administrator Command Line Interface User Guide

NOTE: SERVER is a valid alias for BLADE.
• Description:
Displays the port mapping for the blade specified by the bay number
• Access level/Bay level:
All◦
◦ Bay specific
• Restrictions:
You must have access to the specified bay number.◦
◦ This command is not applicable to storage blades.
• Example:
OA-0018FE27577F> SHOW SERVER PORT MAP
Mezz
Mezz Mezz Device Port Interconnect Interconnect
Slot Device Port Status Bay Bay Port Device ID
------------------------------- Blade 001 ---------
<
absent>
------------------------------- Blade 02A ---------
1 Not Present
Embed Embedded Ethernet
Port 1 OK Bay 1 Port 2 55:1E:0B:91:8F:02
Port 2 No Connect Bay 2 Port 2 55:1E:0B:91:8F:03
------------------------------- Blade 02B ---------
1 Not Present
Embed Embedded Ethernet
Port 1 OK Bay 1 Port 10 00:1E:0B:92:20:6E
Port 2 No Connect Bay 2 Port 10 00:1E:0B:92:20:6F
SHOW BLADE POWERDELAY
• Command:
SHOW BLADE POWERDELAY {ALL | <bay number> [{ - | , } <bay number>]}
NOTE: SERVER is a valid alias for BLADE.
• Description:
Displays the PowerDelay status for the specified server blade or range of server blades
• Access level/Bay level:
All◦
◦ Bay specific
SHOW BLADE POWERDELAY 101