HP Integrity Superdome 2 Onboard Administrator Command Line Interface User Guide

24 Core Analysis Engine commands
The Core Analysis Engine is a component of the HP Integrity Superdome 2 Analysis Engine that
enables users to review all generated events logged by the Analysis Engine.
SHOW CAE
• Command:
SHOW CAE {-L <arguments> | -E <arguments> | -C <arguments>}
• Description:
Displays or clears the Core Analysis Engine event log based on parameters specified by -L
, -E or -C and modified by <arguments>.
◦ -E: Displays event details based on event number.
◦ -L: Displays a summary list of events based on specified <arguments>.
◦ -C: Clears the event data for the specified events.
IMPORTANT: You cannot recover event data once it has been cleared.
NOTE: All arguments are case-sensitive.
Table 1 List of <arguments>
Can be
used
with:ExamplesDescriptionArgument
-E-n 123 — Displays the data for event
123.
Displays the event specified by
<Serial Number>
-n <Serial Number>
-E-a 2 — Displays the data for alert 2.Displays the event specified by
<Alert ID>
-a <Alert ID>
-LDisplays events based on severity
level.
-e [eq:|ne:|le:|ge:]
<Severity Level>
• -e ne:2: Displays events with
severity level not equal to 2.
• eq: Displays events equal to
the specified severity level.
• -e 4: Displays events with severity
level equal to 4.
This is the default if no
argument is specified.
• ne: Displays events not equal
to the specified severity level.
• le: Displays events less than
or equal to the specified
severity level.
• ge: Displays events greater
than or equal to the specified
severity level.
See Table 2 (page 166)for the
severity level values.
-L-e bw:2,5: Displays events with
severity levels between 2 and 5.
Displays events between the
specified severity levels.
See Table 2 (page 166) for the
severity level values.
-e bw:<Severity Level
1>,<Severity Level 2>
164 Core Analysis Engine commands